CCTV Baluns Active CCTV Mini Balun MUXLAB/500023 Muxlab MUXLAB/500023 The CCTV Mini Balun allows a single CCTV video signal to be transmitted via cost-effective unshielded twisted pair (UTP) cable. Used in pairs, the CCTV Balun eliminates costly and bulky coaxial cable, allowing CCTV security and surveillance equipment to be connected using standard structured cabling techniques for neater and more streamlined cabling.... View
Pro Audio & Vídeo Av over IP HDMI 4K over IP PoE Kit MUXLAB/500759 Muxlab MUXLAB/500759 Finally get the 4K video wall display you have always wanted with this HDMI 4K over IP solution which allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a video wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for... View
Broadcast Extenders 12G-SDI Fiber extender kit MUXLAB/500713 Muxlab MUXLAB/500713 The 12G-SDI Fiber Extender Kit allows 12G-SDI to be transmitted up to 33,000ft (10km) via a one singlemode fiber cable in a point-to-point configuration at all specified bit rates. The 12G-SDI Fiber Extender Kit supports transmission of up to 12 Gbpsof digital video within television broadcasting facilities and between professional video equipment. View
Pro Audio & Vídeo Av over IP ProDigital Network Controller MUXLAB/500811 Muxlab MUXLAB/500811 The MuxLab ProDigital Network Controller is a Linux-based PC that allows users to control hub-installed MuxLab products via an Ethernet Web interface. When installed on a local area network (LAN), the MuxLab Network Controller will scan the LAN for connected MuxLab products allowing the user to configure and control these products through an... View
Pro Audio & Vídeo Controller ProDigital Network Controller MUXLAB/500812 Muxlab MUXLAB/500812 The MuxLab ProDigital Network Controller is a Linux-based PC that allows users to control hub-installed MuxLab products via an Ethernet Web interface. When installed on a local area network (LAN), the MuxLab Network Controller will scan the LAN for connected MuxLab AV over IP products allowing the user to auto-discover, configure and control the... View
Pro Audio & Vídeo Extenders HDMI 2.0 Fiber Extender Kit MUXLAB/500464-V2 Muxlab MUXLAB/500464-V2 The HDMI 2.0 Fiber Extender Kit, 500464-V2 enables the user to transmit 4K (4096×2160) video at 60Hz signal up to 3300ft (1000m) via OM4 multi-mode fiber, with any form of scaling or data compression being applied to the signal. This device supports a total data throughput of 18Gbps (6Gbps per lane). The unit supports HDR10+, Dolby Vision and HLG, as... View
Broadcast Splitters 12G-SDI 1X8 Splitter, 4K/60 MUXLAB/500728 Muxlab MUXLAB/500728 The 12G-SDI 1×8 Splitter, 4K/60 (500728) allows one (1) 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to eight (8) 12G/6G/3G/HD/SD-SDI displays. The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-SDI), 720p/1080i (HD-SDI), 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI). The device automatically... View
Broadcast Splitters 12G-SDI 1X4 Splitter, 4K/60 MUXLAB/500727 Muxlab MUXLAB/500727 The 12G-SDI 1×4 Splitter, 4K/60 (500727) allows one (1) 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to four (4) 12G/6G/3G/HD/SD-SDI displays. The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-SDI), 720p/1080i (HD-SDI), 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI). The device automatically... View
Broadcast Display HDMI/3G-SDI Triple Display MUXLAB/500840 Muxlab MUXLAB/500840 The HDMI/3G-SDI Triple Display supports three independent 5 inch TFT LCD displays mounted conveniently and securely on a 2RU 19” rack. These devices save a significant amount of space in multi-display Pro AV and Broadcast applications. View
Broadcast Extenders 3G-SDI to HDMI Extender Kit MUXLAB/500715 Muxlab MUXLAB/500715 The MuxLab 3G-SDI to HDMI Extender Kit converts 3G-SDI to HDMI and then transmits it up to 330 ft / 100m via single Cat5e/6 cable at all resolutions in a point-to-point configuration. The 3G-SDI to HDMI Extender Kit supports the transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time... View
Broadcast SDI over IP 3G-SDI /RS232 over IP Receiver with PoE MUXLAB/500756-RX Muxlab MUXLAB/500756-RX The 3G-SDI /RS232 over IP with PoE allows easy extension and distribution of broadcast quality SDI, HD-SDI or 3G-SDI video with embedded audio over local area networks (LAN).This low-latency and versatile solution consists of individual transmitter and receiver units which can be configured in a variety of combinations. It is a cost effective alternative... View
Analog AV Baluns Analog audio balun MUXLAB/500020 Muxlab MUXLAB/500020 The MuxLab Digital Audio Balun (500020) allows a digital audio source to be connected at distances of up to 600ft / 183m away from a digital audio receiver via single Cat5e/6 cable. Used in pairs, the Digital Audio Balun allows a digital audio source such as BluRay, media servers, gaming consoles, or satellite receivers to be connected to a digital audio... View
Analog AV kits / 2 packs Stereo Hi-Fi Balun, 2-Pack MUXLAB/500028-2PK Muxlab MUXLAB/500028-2PK The MuxLab Stereo Hi-Fi Balun Kit (500028-2PK) allows an unbalanced line-level Hi-Fi stereo analog audio signal to be transmitted via single Cat5e/6 cable in a point-to-point connection to distances of up to 3,250ft / 1km. The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required. View
Analog AV Baluns VGA Balun II MUXLAB/500040 Muxlab MUXLAB/500040 allowing a VGA source to be connected to a VGA monitor via one (1) 4-pair Cat5E/6 unshielded twisted pair (UTP) cable. Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350ft (107m) via Cat5E/6 at 800 x 600 resolution. Each VGA connection requires p/n 500040 or 500043 at the source and either p/n 500041 or 500042 at the display.... View
dante HDMI/Dante over IP PoE Transmitter, UHD-4K MUXLAB/500759TXDANTE MUXLAB/500759TXDANTE The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported,... View
Analog AV Baluns S-Video/Audio Balun MUXLAB/500017 Muxlab MUXLAB/500017 The S-Video Balun allows a single S-Video signal to be transmitted via unshielded twisted pair (UTP) cable up to 1000 ft (305m) in a point-topoint connection. The product is available in two models; the SVideo Balun (500016) and the S-Video/Audio Balun (500017). Used in pairs, the S-Video Balun eliminates costly and bulky S-Video cable, allowing S-Video... View
Analog AV Baluns VGA Balun II MUXLAB/500041 Muxlab MUXLAB/500041 Allowing a VGA source to be connected to a VGA monitor via one (1) 4-pair Cat5E/6 unshielded twisted pair (UTP) cable. Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350ft (107m) via Cat5E/6 at 800 x 600 resolution. Each VGA connection requires p/n 500040 or 500043 at the source and either p/n 500041 or 500042 at the display.... View
Analog AV Baluns VGA Balun II MUXLAB/500042 Muxlab MUXLAB/500042 Allowing a VGA source to be connected to a VGA monitor via one (1) 4-pair Cat5E/6 unshielded twisted pair (UTP) cable. Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350ft (107m) via Cat5E/6 at 800 x 600 resolution. Each VGA connection requires p/n 500040 or 500043 at the source and either p/n 500041 or 500042 at the display.... View
Pro Audio & Vídeo Splitters HDMI 1×4 Splitter, UHD-4K MUXLAB/500421 Muxlab MUXLAB/500421 The HDMI 1×4 Splitter (500421) allows one (1) HDMI source to be distributed to up to four (4) HDMI displays. The splitter supports up to 4K (3840 X 2160), 8-bit color and HD audio. The splitter is HDCP 1.3 compliant and features LED diagnostics. Additionally, all HDMI connectors are on the rear panel for neater cabling. Applications include; commercial... View
Pro Audio & Vídeo Splitters HDMI 1×2 Splitter, UHD-4K MUXLAB/500423 Muxlab MUXLAB/500423 The HDMI 1×2 Splitter (500423) allows one (1) HDMI source to be distributed to up to two (2) HDMI displays. The splitter supports up to 4K (3840 X 2160), 8-bit color and HD audio. The splitter is HDCP 1.3 compliant and features LED diagnostics. Additionally, all HDMI connectors are on the rear panel for neater cabling. Applications include; commercial... View
Pro Audio & Vídeo Matrix Switches HDMI 4×2 Matrix Switch, UHD-4K MUXLAB/500442 Muxlab MUXLAB/500442 This 4 x 2 4K HDMIÿMatrixÿSwitchÿconnects 4x HDMI sources to 2x local displays. This matrix provides resolution support up to and including 4K30 plus all 3D formats, and supports independent EDID control. Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232 or by using the selection buttons on... View
Pro Audio & Vídeo Extenders Hdmi extender HDBT, UHD-4K MUXLAB/500451-TX Muxlab MUXLAB/500451 This HDMI extender 4K allows HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. This HDMI extender 4K kit comes with one (1) transmitter, one (1) receiver, one (1) IR Emitter, and... View
Pro Audio & Vídeo Extenders HDMI – VGA/Audio Wall-Plate Transmitter, UHD-4K MUXLAB/500455-TX Muxlab MUXLAB/500455-TX The HDMI – VGA/Audio Wall-Plate Transmitter is a Decorar style transmitter that installs in a double-gang wall box to provide a convenient interface for HDMI / VGA input sources. It has one (1) HDMI IN, one (1) VGA IN, one (1) Audio In and one (1) HDBaseT Out. It supports VGA with full HD scaler, and HDMI 1.4 with 4k& 3D, input signals support... View
Broadcast Splitters 3G-SDI 1×4 Splitter MUXLAB/500719 Muxlab MUXLAB/500719 The 3G-SDI 1×4 Splitter (500719) allows one (1) 3G/HD/SD-SDI source to be distributed and amplified to up to four (4) 3G/HD/SD-SDI displays. The splitter supports up to 1080p video, including 480i (SD-SDI), 720p/1080i (HD-SDI), and 1080p (3G-SDI). The device automatically detects the 3G/HD/SD-SDI signal and re-clocks and regenerates the signal at the... View