muxlab

 

MuxLab is a leading value-added connectivity hardware company for the Pro AV, Broadcast and CCTV markets. Since 1984, it continues to support the main mission of providing its clients with innovative and industry-leading designs and launches the new IP Video products to the market.

Here are a few novelties that Muxlab has brought to the market:

 

 

 

Connects and extends 4K@30 or 1080p to create a video wall of any user configurable size supporting hundreds of screens, depending on network bandwidth, using one receiver for each display. Transmitters and receivers can be connected via Cat5e/6 cable up 100m from the Ethernet Switch. This system supports audio insertion and extraction, RS232 and IR transmission for remote control and is PoE powered.

VIDEO IP Muxlab-500759 percon

 

FEATURES:

  • Configure a Video Wall array with 100’s of displays, depending on network bandwidth
  • Supports up to 4K @ 30Hz and 1080p @ 60Hz
  • Visually lossless video (1 frame latency)
  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
  • Transmission up to 330ft (100m) over Cat5e/6
  • Supports audio insert (TX) & audio extract (RX)
  • Supports RS232 and IR transmission for remote control
  • PoE powered
  • Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)

 

 

Splits one 3G/HD/SD-SDI signal and distributes it to up to four 3G/HD/SD-SDI The HDMI 4K over IP PoE Extender Kit allows HDMI equipment to be extended up to 330ft (100m) up to 4K (3840×2160) resolution @ 30Hz via one (1) Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also possible by connecting several units to the same local Ethernet network, and the device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.

 

VIDEO IP Muxlab-500758 PERCON

FEATURES:

 

  • Supports HDMI up to 4K @ 30Hz (4:4:4)
  • Supports 100’s of Transmitters & Receivers depending on network bandwidth
  • Extend HDMI up to 330ft (100m) over Cat5e/6
  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
  • Supports audio insert (TX) & audio extract (RX)
  • Supports RS232 and IR transmission for remote control

 

 

Supports up to 4K/60 (4:4:4) video streams up to 100 meters using just one.

CAT5e/6 cable. Also connects HDMI to a local Ethernet network in a low bandwidth, expandable manner, allowing for AV streaming over a network, Wi-Fi or the Internet. Up-scales 1080p input to 4K@60 output. Accepts H.264/ H.265 video streams, and provides a USB 3.0 Type A connector for storing and playback of local content from an external USB drive.

 

09

FEATURES:

 

  • Receiver supports up to 4K @ 60Hz (4:4:4) video streams
  • Receiver up-scales 1080p @ 60Hz video streams from Transmitter and other devices up to 4K @ 60Hz
  • Transmitter supports up to 1080p @ 60Hz video
  • Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
  • H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
  • High image quality and 100ms latency depending on protocol
  • Supports 100’s of Transmitters & Receivers depending on network bandwidth
  • Supports Multicast (LAN), and RTSP / RTMP / HLS (LAN & Internet)
  • USB 3.0 port for storing and playback of local content from an external USB drive (RX)
  • Supports SPDIF (TosLink) Audio Out (RX)
  • 2CH audio insert (TX), and 2CH audio extract (RX)
  • RS232 and Directional IR for remote control of end-devices
  • PoE powered, via PoE (PSE) Ethernet Switch
  • Managed remotely via Pro Digital Network Controller (500811)

 

 

logo percon